Canon imageRUNNER ADVANCE C5235 Basic Operation Manual Download Page 174

Page: 174 / 208

174

Question

Applicable Page

I want to make a rush copy, but I cannot because of the long copy job.

p. 176

When copying, the Scan screen for the next document is displayed. Is there a way to not display this screen?

p. 176

How do I change the default settings for the Copy from the Color mode to the Black mode?

p. 177

Can a mark be applied to the document that has been scanned?

p. 177

Do I need to enter the address of the recipient every time?

p. 178

Can I send a fax to multiple destinations?

p. 179

Can you give me information on how to send to the SMB server and specify its settings?

p. 179

Can I move the Address Book registered on another Canon machine onto this machine?

p. 181

Can I forward the data received via fax/I-fax?

p. 181

Q10

When sending a fax, can the machine be set so that the sender’s fax number and name be displayed?

p. 182

Q11

How do I change the default settings (scan settings and fi le format) of the Scan and Send Basic Features screen?

p. 182

Q12

Is there a way to prevent a transmission error when sending a facsimile to a new destination?

p. 183

Q13

The quality of the image sent by fax is not good.

p. 184

Q14

How can I make use of multiple telephone lines?

p. 184

Q15

How do I register/edit destinations in a one-touch button?

p. 185

Q16

Can I add an arbitrary subject when sending e-mail?

p. 186

Q17

How do I change the storage period for the scanned fi le stored in the Mail Box?

p. 186

Q18

How do I access the Advanced Box from a computer?

p. 187

Q19

How do I forward received data to the Advanced Box?

p. 187

Q20

How do I set to create a booklet with a fi le in a mail box?

p. 188

Q21

I cannot print PDF fi les stored in the Advanced Box. Are optional products required?

p. 188

Q22

When printing from the computer, booklet was not made even though saddle stitch booklet mode was set.

p. 188

Q23

The content of the reverse side appears on the copies.

p. 189

Q24

The printed paper appears dirty. Also, the color appears to be diff erent from the original.

p. 190

Q25

The printed paper is warped.

p. 190

Q26

I had printed from the computer, but I did not fi nd the output. I am afraid that someone may have taken it by mistake.

p. 191

Q27

Can I specify the scan settings from the computer and then store for the original loaded in the machine?

p. 191

Q28

Can I make copies or send a facsimile of diff erent size originals at the same time?

p. 192

Frequently Asked Questions

This section includes frequently asked questions and answers regarding the machine. Use this section if you have trouble using the
machine.

Basic Operation Guide: imageRUNNER ADVANCE (iRA) C5235, iRA C5240, iRA C5250, iRA C5255 - 04/2012

Summary of Contents for imageRUNNER ADVANCE C5235

















































































































































































































Search results

Summary of Contents for imageRUNNER ADVANCE C5235

Reviews:

Related manuals for imageRUNNER ADVANCE C5235

Brands by name

Popular brands

Canon imageRUNNER ADVANCE C5235, Basic Operation Manual

Search results

Summary of Contents for imageRUNNER ADVANCE C5235

Reviews:

Related manuals for imageRUNNER ADVANCE C5235

Brands by name

Popular brands