Canon imagePROGRAF W2200, User Manual

Page: 36 / 154

Print Media You Can Use
14
2-14
Note
z
The printer is shipped from the factory with the “Media Size” set for “B5-JIS” and
the “Media Type” set for “Plain Paper”.
z
While printing with one of the settings described above, if the ink blurs or if
printing is too light, select Special 1 to 5 for the “Media Type”. These settings
adjust the ink density in five steps, starting with the lowest density (1) to the
highest density (5). The setting may require testing and adjustment, depending on
the media in use and the content of the image.
z
“Proof C” and “Proof D” are displayed as media type items on the operation panel,
but these items are not currently available for selection. These are preliminary
settings for selection to be added in the future.
z
To achieve better quality printing, perform the “Paper Adjust” setting on the
operation panel.(
Æ
“Adjusting the Amount of Line Feed for Each Media” P.7-40)
1
Press the Online button to switch off the Online lamp.
The printer is set offline.
2
Press the Set Media button.
The Set Media menu opens.
Set Media
Reset/Enter
Power
Online Message
Ink Replace Online
Setup
Cancel Job/
Utility
Set Media
Reset/Enter
Power
Online Message
Ink Replace Online
Setup
Cancel Job/
Utility