Loading Paper Cassettes
11
2-11
Important
z
Wait for all of the paper or other print media in the cassette to be used up before
loading more paper.
z
Never mix different types of paper or other print media in the same stack.
z
When printing transparencies, always load 1 sheet of plain paper the same size as
the transparencies on the bottom of the stack.
7
Move the width guide until it rests lightly against the side of the stack.
z
To ensure smooth paper feed from the cassette, make sure that the width guide is
snug and not too tight against the side of the stack. If the width guide is too tight, or
if there is a gap between the paper and the guide, this may cause paper to feed
incorrectly.
8
Install the cassette cover.
Align the four pegs on bottom of the cassette cover with the holes in the
cassette below and set the cover on the cassette.
9
Set the paper cassette in the printer.
Push the paper cassette completely into the printer.
Summary of Contents for imagePROGRAF W2200
