Canon imagePROGRAF W2200 User Manual Download Page 148

Page: 148 / 154

Other Important Information

8-8

Uninstalling the GARO Device Setup Utility

Follow the procedures below to uninstall the GARO Device Setup Utility
installed with Windows.

On the desktop click the Start button, point to Settings, then click
Control Panel.

The Control Panel window opens.

Double-click the Add/Remove Programs icon.

Select GARO Device Setup Utility from the list of software
applications then click the Change/Remove button.

Follow the messages indicated on the screen to uninstall the GARO
Device Setup Utility.

Uninstalling NetBIOS/NetBEUI Port Monitor

On the desktop, click the Start button, point to Settings, then click
Control Panel.

Double-click the Add/Remove Programs icon.

Select the software to be uninstalled from the list of software
applications then click the Change/Remove button.

Follow the messages indicated on the screen to uninstall the
NetBIOS/NetBEUI Port Monitor.

Summary of Contents for imagePROGRAF W2200



























































































































































Search results

Summary of Contents for imagePROGRAF W2200

Reviews:

Related manuals for imagePROGRAF W2200

Brands by name

Popular brands

Canon imagePROGRAF W2200, User Manual

Search results

Summary of Contents for imagePROGRAF W2200

Reviews:

Related manuals for imagePROGRAF W2200

Brands by name

Popular brands