21
If Roll Paper Jams
Always move the
Carriage
to the right side. If the
Carriage
is on the left, a
Carriage
error may occur
when you turn on the printer.
•
For a neater edge, cut the edge of the paper.
•
(
→
"Specifying the Cutting Method for Rolls," User's Guide)
Do not force the roll paper into alignment with the
Paper Alignment Line
(b). This may prevent the
paper from being advanced straight.
•
5
6
7
8
9
Holding the paper on both sides, pull the jammed portion
out toward the front. Use scissors or a cutting tool to cut
away the printed or wrinkled portion.
If the
Carriage
is on the left, move the
Carriage
to the
right until it stops.
Hold the edge of the roll paper in the middle as you
gently pull it evenly to the position of the
Ejection Guide
(a). Align the right side of the roll paper with the
Paper
Alignment Line
(b), keeping this side parallel to the line,
and then lower the
Release Lever
.
Close the
Top Cover
.
Turn the printer on.
(
→
"Turning the Printer On and Off," User's Guide)
The roll is now advanced. After it is
fi
nished being
advanced, you can resume printing.
b
a
