46
Error Messages
Error Message
Cause
Corrective Action
Paper size not detected.
Paper has been loaded askew, or
warped paper has been loaded.
Follow these steps to reload the roll.
If this error recurs after you reload the roll, remove
the
Roll Holder
from the printer, push the roll firmly in
until it touches the
Roll Holder
flange, and reload the
Roll Holder
in the printer.
Lift the
Release Lever
.
1.
Because the
Platen
is soiled with
ink or other substances, the size of
the clear film cannot be detected.
Open the
Top Cover
and clean the entire
Platen
.
Adjust the right edge of the roll to make it parallel to
the right
Paper Alignment Line
.
2.
Follow these steps to reload the sheet.
(
→
, Loading Sheets in the Printer)
If
Not finished printing. Finish printing
remaining jobs?
is shown on the
Display Screen
,
press the
OK
button.
3.
Printing will resume, starting from the page on
which the error occurred.
(
→
, Loading Rolls in the Printer)
(
→
, Attaching the Roll Holder to Rolls)
Lift the
Release Lever
.
1.
Adjust the right edge of the sheet to make it parallel
to the right
Paper Alignment Line
and the trailing
edge of the sheet to make it parallel to the paper
alignment line under the
Paper Retainer
.
2.
If
Not finished printing. Finish printing
remaining jobs?
is shown on the
Display Screen
,
press the
OK
button.
3.
Printing will resume, starting from the page on
which the error occurred.
(
→
, If Paper is Soiled)
Borderless printng not possible.
Paper stretched or shrank.
The loaded roll has expanded or
contracted due to environmental
conditions, making it wider or
narrower than the supported width
for borderless printing.
Press the
OK
button to stop printing.
Use each type of paper only where the recommended
environmental conditions are met. For details on
environmental conditions for various paper, see the
Paper Reference Guide
.
(
→
"Types of Paper," User's Guide)
