45
Error Messages
Error Message
Cause
Corrective Action
Paper loaded askew.
Paper loaded crooked was
detected when the paper was
advanced.
Follow these steps to reload the roll.
Lift the
Release Lever
.
1.
Adjust the right edge of the roll to make it parallel to
the orange
Paper Alignment Line
.
2.
If this error recurs after you reload the roll, remove
the
Roll Holder
from the printer, push the roll firmly in
until it touches the
Roll Holder
flange, and reload the
Roll Holder
in the printer.
Follow these steps to reload the sheet.
Lift the
Release Lever
.
1.
Pull out the sheet.
2.
Lower the
Release Lever
.
3.
(
→
, Loading Rolls in the Printer)
(
→
, Attaching the Roll Holder to Rolls)
(
→
, Loading Sheets in the Printer)
Lower the
Release Lever
.
3.
Adjust the right edge of the sheet to make it parallel
to the right
Paper Alignment Line
and the trailing
edge of the sheet to make it parallel to the paper
alignment line under the
Paper Retainer
.
4.
Paper mismatch
You tried to print a test pattern
for printer adjustment on several
sheets, but sheets of different
types or sizes of paper were used.
When printing a test pattern for adjustment, use
sheets of the same size and type of paper, in the
required quantity.
Replace the paper as follows and perform adjustment
again.
Press
▲
or
▼
to select
Stop Printing
, and then
press the
OK
button to stop printing.
1.
Replace the paper.
2.
Press
▲
or
▼
to select
Change Paper
, press the
OK
button, and replace the paper.
(
→
"Loading and Printing on Sheets," User's Guide)
The printer now starts printing the test pattern.
Execute adjustment again from the control panel
menu.
3.
(
→
"Loading and Printing on Sheets," User's Guide)
