manualshive.com logo in svg

Canon imagePROGRAF iPF8300, User Manual, Page: 1087 / 1150

Share
Download
Canon imagePROGRAF iPF8300 User Manual Download Page 1087

Cannot print over a network

Cannot connect the printer to the network .....................................................................................................

1069

 

Cannot print over a TCP/IP network ..............................................................................................................

1069

Cannot print over a NetWare network ...........................................................................................................

1070

Cannot print over AppleTalk or Bonjour networks .........................................................................................

1070

Cannot connect the printer to the network

Cause

Corrective Action

The Ethernet cable
is not connected
correctly to the
printer's Ethernet
port.

1.

Make sure the printer is connected to the network with the correct Ethernet cable, and then
turn the printer on. For instructions on connecting the cable, refer to the Setup Guide.

2.

Make sure the Link indicator is lit.
The top and bottom indicators are lit if the printer is connected via 1000Base-T. The bottom
indicator is green if the printer is connected via 100BASE-TX, and the top indicator is orange
if connected via 10BASE-T.
If the Link indicator is not lit, check the following points.

•

Make sure the hub is on.

•

Make sure the end of the Ethernet cable is connected correctly.
Insert the Ethernet cable until it clicks and locks in place.

•

Make sure there is no problem with the Ethernet cable.
If there is any problem, replace the Ethernet cable.

•

Check the communication mode with the hub.
Although the printer normally detects the hub communication mode and transmission rate
automatically (in auto negotiation mode), sometimes the hub settings cannot be detected.
In  this  case,  configure  the  connection  method  manually,  specifying  the  communication
mode in use.

 (See "

Configuring the Communication Mode Manually

.")

→P.960

Cannot print over a TCP/IP network

Cause

Corrective Action

The printer's IP address is not
configured correctly.

Make sure the printer's IP address is configured correctly.

 (See "

Configuring the IP Address Using imagePROGRAF Device Setup Utili-

ty

.")

→P.436

 (See "

Configuring the IP Address Using the Printer Control Panel

.")

→P.951

The printer's TCP/IP network set-
tings are not configured correctly.

Make sure the printer's TCP/IP network settings are configured correctly.

 (See "

Configuring the Printer's TCP/IP Network Settings

.")

→P.956

The computer you are trying to
print from is not configured cor-
rectly.

Make sure the computer's TCP/IP network settings are configured correctly.

 (See "

Configuring the Printer Driver Destination 

.")

→P.963

 (See "

Configuring the Destination in TCP/IP Networks 

.")

→P.977

Troubleshooting 

>

 Cannot print over a network 

>

iPF8300

Cannot connect the printer to the network

12

1069

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for imagePROGRAF iPF8300































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments