Canon imagePROGRAF iPF770, User Manual

Page: 327 / 594

2
Press the OK button.
The Paper Menu is displayed.
3
Press ▲ or ▼ to select Chg. Paper Size , and then press the OK button.
4
Press ▲ or ▼ to select Roll Length , and then press the OK button.
5
Press ▲ or ▼ to select the length of paper loaded in the printer, and then press the OK button.
Specify the roll length as follows.
1.
Press the
◀
or
▶
button to move to the next field for input.
2.
Press the ▲ or ▼ button to enter the value.
3.
Repeat steps 1 and 2 to finish entering the value, and then press the OK button.
Removing the Roll from the Printer
Removing the Roll from the Printer
Remove rolls from the printer as follows.
Note
•
If you need to cut the roll,
see "Specifying the Cutting Method for Rolls."
➔
P.333
1
On the Tab Selection screen of the Control Panel, press
◀
or
▶
to
select the Paper tab ( ).
Note
•
If the Tab Selection screen is not displayed, press the Menu button.
2
Press the OK button.
The Paper Menu is displayed.
3
Press ▲ or ▼ to select Eject Paper , and then press the OK button.
4
Press ▲ or ▼ to select Yes , and then press the OK button.
The roll is now rewound and ejected.
Caution
• If you have selected ManageRemainRoll > On in
the Control Panel menu, a barcode is printed on
the leading edge of the roll.
Do not remove the roll before the barcode is prin-
ted. You will be unable to keep track of the amount
of roll paper left.
(See "Keeping Track of the Amount of Roll Paper Left.")
➔
P.331
iPF770 Removing the Roll from the Printer
User's Guide
Handling and Use of Paper
Handling rolls
327