Canon imagePRESS Server B5000, Configuration And Setup

Page: 60 / 128

The imagePRESS Server supports the following authentication methods:
•
Anonymous (Lotus Domino, Windows Server 2003, Windows Server 2008)
•
Simple (Lotus Domino, Windows Server 2003, Windows Server 2008)
•
GSSAPI (Windows Server 2003, Windows Server 2008)
Note: When you use an LDAP server that requires authentication, start Configure from WebTools and in
Network
>
LDAP
, set
Type
to
Simple
or
GSSAPI
. If you choose
Automatic
, authentication might not complete
correctly.
Settings:
Automatic
(default)
GSSAPI
Simple
Note: Simple becomes the default selection if Authentication Required
on page 59 is selected.
User Name
Enter the user name for access to the LDAP server. This information is used if the authentication method is
Simple or GSSAPI.
Password
Enter the password for access to the LDAP server. This information is used if the authentication method is
Simple or GSSAPI. If you use GSSAPI authentication, the password is encrypted when it is sent across the
network.
Domain
Type the name of the domain in which the LDAP server exists. This information is used if the authentication
method is GSSAPI.
Search Base
Type the search base to search an LDAP server. The imagePRESS Server searches the area of the directory
specified by the search base.
Maximum Entries
Specify the maximum number of results that the imagePRESS Server accepts from the LDAP server.
Settings:
0-65535 (default is 10000)
Configuration and Setup
Setting up from the printer control panel
60