Server
Enter the name or IP address of the LDAP server that you want to use.
Settings:
Name or IP address of the LDAP server
Port
Specifies the imagePRESS Server port used to communicate to the LDAP server. When
Secure Communication
is selected, the port number automatically changes to
636
. When
Secure Communication
is not selected, the
port number automatically changes to 389. After the port number changes, the user can override the specified
port.
Settings:
1-65535 (default is 389)
Secure Communication
Verifies authentication based on the exchange of certificates based on public/private keys according to the X509
standard using either Secure Socket Layer (SSL) by default or Transport Layer Security (TLS) if the LDAP server
supports TLS.
Settings:
On
Off (default)
Authentication Required
Select if queries to your LDAP server require authentication.
Settings:
On
Off (default)
Authentication Type
Depending on the setting, enter the User Name, Password, and Domain for the authentication.
Note:
This option is only available when
on page 59 is selected.
If you use GSSAPI, note the following:
•
A DNS server that supports Reverse DNS Lookup must be present on your network.
•
The LDAP server IP address and host name must be registered on the DNS server.
•
The time difference between the LDAP server and the System Time of the imagePRESS Server must be five
minutes or less.
Configuration and Setup
Setting up from the printer control panel
59
Summary of Contents for imagePRESS Server B5000
Page 8: ...Configuration and Setup Contents 8 ...
Page 124: ...Configuration and Setup Troubleshooting 124 ...
Page 127: ......
