2
In the
Add Path
dialog box, enter a path in the
Common Global Path
field. For example, use the format of a
mapped drive (for example,
Z:\folder
) or a UNC (for example,
\\computer name\folder
).
3
If the path is located on a computer that requires authentication, select
Remote Server Authentication
, enter the
appropriate user name and password, and click
OK
.
4
Click
OK
.
5
If required, add more paths.
User-defined search paths for a single job
A user can enter a single search path when the user sends the job from a Windows printer driver, or when someone
later overrides the job to include a search path.
The path must be fewer than 256 characters, and in the format of a mapped drive (for example,
Z:\folder
) or a UNC
(for example,
\\computer name\folder
).
To use a mapped drive, it must be recognized by the imagePRESS Server. For example, if the user specifies a path on
the user’s computer (for example,
C:\My Documents\VDP
), the imagePRESS Server assumes this is the
C:\
drive on
the imagePRESS Server. In another example, if “Z:” is a network drive that users access on their network, the
imagePRESS Server does not know the location to which “Z:” refers. Therefore, you must map a drive so that the
imagePRESS Server also recognizes the location where resources are stored.
Map a network drive
To map a network drive to the imagePRESS Server, you must access the imagePRESS Server through either the Fiery
Advanced Controller Interface (FACI) (if available) or Remote Desktop.
To map a network drive to the imagePRESS Server, you must access the imagePRESS Server through either the Fiery
Advanced Controller Interface (FACI) (if available) or Remote Desktop.
This task is an example of how to map a network drive and is specific to Windows 8.1 only. For information about
how to map network drives on other operating systems, refer to the Help for that operating system.
1
On the desktop screen, move the mouse down from the upper-right corner of the screen, click
Search
, enter
Computer, then click
Apps
>
Computer
.
2
Select
Computer
from the menu bar.
3
Click
Map network drive
.
4
Select a drive letter.
5
Enter the path to the drive or click
Browse
to select the drive.
6
To connect every time you sign in, select
Reconnect at sign-in
.
7
Click
Finish
.
8
Inform the user to use the drive letter in the VDP search path when the user sends the job to the imagePRESS
Server.
Configuration and Setup
Administration
118
Summary of Contents for imagePRESS Server B5000
Page 8: ...Configuration and Setup Contents 8 ...
Page 124: ...Configuration and Setup Troubleshooting 124 ...
Page 127: ......
