Off (default)
Setup Other Ports
You can add, redirect, or delete specified ports or a specified range of ports.
Note:
The ability to add or modify ports is only available through the printer control panel (under
Network
>
IP
Port Setup
>
Setup Other Ports
). It is not available through Configure.
Note:
Do not specify the same port, or the same port range, more than once.
Note:
You can register a maximum of 100 ports or ranges of ports for
Add Port
,
Add Port Range
,
Redirect Port
,
and
Redirect Port Range
combined.
Add Port
Press to specify a port to add.
Settings:
1-65535 (default is 1)
Add Port Range
Press to specify a range of ports to add.
•
From Port
: Enter the starting port of the range.
•
To Port
: Enter the ending port of the range. The value must be greater than the starting value entered in
From Port
.
Settings:
1-65535 (default is 1)
Redirect Port
Press to specify a port to redirect.
•
Original Port
: Enter the original port to be redirected.
•
Target Port
: Enter the target port for the redirected traffic.
Settings:
1-65535 (default is 1)
Redirect Port Range
Press to specify a range of ports to redirect.
Configuration and Setup
Setting up from the printer control panel
50
Summary of Contents for imagePRESS Server B5000
Page 8: ...Configuration and Setup Contents 8 ...
Page 124: ...Configuration and Setup Troubleshooting 124 ...
Page 127: ......
