Canon imagePRESS C1 P, Service Manual, Page: 948 / 1265

Chapter 16
16-51
P006 15 Detection of locking of the primary expiration FAN FM1 L: Locked (synchronous rotation)
14
Detection of locking of the transfer drum cleaner cooling
FAN
FM7
L: Locked (synchronous rotation)
13 Cartridge motor error LC M32 L: Error
12 Cartridge motor error LM M31 L: Error
11 Cartridge motor error K M30 L: Error
10 Cartridge motor error C M29 L: Error
9 Cartridge motor error M M28 L: Error
8 Cartridge motor error Y M27 L: Error
7 - - -
6 - - -
5 Cartridge micro SW (LC) SW12 H: Set
4 Cartridge micro SW (LM) SW11 H: Set
3 Cartridge micro SW (K) SW10 H: Set
2 Cartridge micro SW (C) SW9 H: Set
1 Cartridge micro SW (M) SW8 H: Set
0 Cartridge micro SW (Y) SW7 H: Set
P007
15
Reverse cooling FAN half
FM20
H: Half speed on (Full speed at port6=H)
14 Reverse cooling FAN full FM20 H: Full speed
13 Patch detection (REAR) LED on H: On
12 - - -
11 ITOP remote - H: On
10 Patch detection (CENTER) LED on PS3 H: On
9 Patch detection (FRONT) LED on PS4 H: On
8 Pre-exposure LED on LED1 H: On
7 - - -
6 - - -
5 - - -
4 ITB cleaning brush roller drive motor 11 M26 (port2:port3)
(0:0)=Setting 0 (Excitation off)
(0:1)=Setting 1, (1:0)=Setting 2, (1:1)=Setting 3
3
ITB cleaning brush roller drive motor 10
M26
2 ITB cleaning brush roller CW M26 -
1
ITB cleaning brush roller MODE
M26
0: Full step (2-phase excitation)
1: Half step (1'-2-phase excitation)
0
ITB cleaning brush roller CLK
M26
Phase is switched at the edge at start-up.
P008 15 - - -
14 - - -
13 - - -
12 - - -
11
ITB cleaning brush roller detachment/attachment motor
11
M18
(port2:port3)
(0:0)=Setting 0 (Excitation off)
(0:1)=Setting 1, (1:0)=Setting 2, (1:1)=Setting 3
10
ITB cleaning brush roller detachment/attachment motor
10
M18
9
ITB cleaning brush roller detachment/attachment MODE
M18
0: Full step (2-phase excitation)
1: Half step (1'-2-phase excitation)
8
ITB cleaning brush roller detachment/attachment CLK
M18
Phase is switched at the edge at start-up.
7 - - -
6 - - -
5 - - -
4 - - -
3 - - -
2 - - -
1
Post-fixing lower FAN half
FM17
H: Half speed on (Full speed at port0=H)
0 Post-fixing lower FAN full FM17 H: Full speed
Address bit Name Symbol Remarks