Canon imagePRESS C1 P, Service Manual, Page: 1136 / 1265

Chapter 16
16-239
PRNT-POS Set whether or not to perform a simultaneous pause for the subsequent print job when canceling
a job after an error occurs.
Perform a simultaneous pause for a print job when a job cancellation (#037, etc.) occurs caused
by an internal error, other than a
2
Setting range
0: Do not perform a simultaneous pause.
1: Perform a simultaneous pause.
Standard value
0
AFN-PSWD Use it to set restrictions on access in additinal functions mode.
2 settings
0: off (shift to user mode scan without requiring password; default)
1: on (shift to user mode scan after password match)
PTJAM-RC Set whether or not to perform recovery of a PDL jam.
This mode is used to set whether or not to perform recovery printing when a jam occurs in a PDL
job.
2
Setting range
0: Do not perform recovery.
1: Perform recovery.
Standard value
1
This mode suits for operators who do not want recovery printing (e.g., receipt and payment slip)
with jam recovery without being noticed by them.
SLP-SLCT Use it to set the switch designed to switch between existing network-based applications.
2
A certain packet needs to be received as a condition for the machine to recover from sleep mode
via network. Because the existing network system applications (e.g., Net Spot Accountant, image
WARE) do not send such packet, the machine fails to recover via network if it's shifted to sleep
mode 3.
When setting '1', the machine able to recover from sleep mode via network because it does not
shift to sleep mode 3 (1wsleep), resulting the trade-off with the increase of consuming electricity.
settings
0: do not use (default); 1: use
MEMO:
This is not used at normal servicing.
PS-MODE Selecting compatibility mode when using PS (image processing, print specification)
2
This is the mode to simulate REPLACE to hold compatibility for image processing and print
specification.
settings
0: no use of PS compatibility mode (default)
1: image processing equivalent of iR2220/2800/3300 series (compatibility with existing
machines)
2: image processing equivalent of iR105 (compatibility with existing machine)
3: backup
4: landscape image and portrait image can be duplexed printing using Canon controller. This is
the compatible mode with non-Canon controller.
5 through 65535: backup
When the setting value is '1', the output will be equivalent to that of iR2200 / 2800 / 3300 series.
Whereas when the setting value is '2', the output will be equivalent to that of iR105 series.
COPIER>OPTION>USER
Subheading Contents Level