Canon imagePRESS C1 P, Service Manual, Page: 946 / 1265

Chapter 16
16-49
F-16-23
16.3.2 <DC-CON>
0011-9635
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / imagePRESS C1+
T-16-64
Address bit Name Symbol Remarks
P001 15 - - -
14 - - -
13 Detection of 24V at side driver - Detection of 24V
12 - - -
11 Hopper shutter switch H: Shutter opened
10 Detection of open/close at hopper door PS74 L: Open
9 Buffer type judgment signal - L: Belt drive type
8 - - -
7 - - -
6 - - -
5 Toner presence/absence sensor(LC) TS6 H: Toner is present.
4 Toner presence/absence sensor(LM) TS5 H: Toner is present.
3 Toner presence/absence sensor(K) TS4 H: Toner is present.
2 Toner presence/absence sensor(C) TS3 H: Toner is present.
1 Toner presence/absence sensor(M) TS2 H: Toner is present.
0 Toner presence/absence sensor(Y) TS1 H: Toner is present.
P002 15 ITOP signal A (output from IMG1) - L: Detected
14 ITOP signal B (output from IMG1) - L: Detected
13 Primary wire HP sensor PS82 0: HP
12 Detection of locking of the backside driver reserve FAN - L: Locked (synchronous rotation)
11 Detection of open/close of the multi tray (movement) PS8 L: Open
10 ITOP sensor PS1 L: ITOP mark detected
9 ITOP sensor PS2 L: ITOP mark detected
8 Rotary HP sensor PS21 O:HP
7 ITB cleaner HP sensor PS24 H: HP / Flag is set (protected against light)
6 - - -
5 Screw HP sensor (LC) PS73 H: HP / Flag is set (protected against light)
4 Screw HP sensor (LM) PS72 H: HP / Flag is set (protected against light)
3 Screw HP sensor (K) PS71 H: HP / Flag is set (protected against light)
2 Screw HP sensor (C) PS70 H: HP / Flag is set (protected against light)
1 Screw HP sensor (M) PS69 H: HP / Flag is set (protected against light)
0 Screw HP sensor (Y) PS68 H: HP / Flag is set (protected against light)
Adjust Function Option Test Counter I/O Display
P001
P002
P003
P004
P005
P006
P007
P008
<DC-CON> < 1/3 > < READY >
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
bit0
bit7
adress