manualshive.com logo in svg

Canon imagePRESS C1 P, Service Manual, Page: 745 / 1265

Share
Download
Canon imagePRESS C1 P Service Manual Download Page 745

Chapter 14  

14-10

F-14-12

Field Remedy

1. Check the front and under sides of J423 connector (11 pins), which connect when the fixing feeder assembly is set into the main body, for poor contact. If

pins are deformed, modify them and then connect the connector.

F-14-13

2. Check J3416 connector on the side driver PCB and J3419 connector that extends from the same PCB to the DC controller PCB for poor connection. If pins

are deformed, modify them and connect the connectors again.

3. If the pre-exposure LED did not come on because of poor contact of the connectors, the drum potential may not be controlled normally. Modify the

connectors and turn the main power switch OFF and then ON to make the machine perform an initial rotation.

4. If no problem was found with the connectors in Step 1 and 2, check J431 connector in the LED side (pre-exposure LED) and J425 connector (photosensitive

drum cleaning pre-exposure LED) for poor contact. If pins are deformed, modify them, and then re-fit the connectors.

5. Perform Step 3 again.

6. If the symptom still occurs, check J1167 connector on the DC Controller PCB. If pins are deformed, modify them, and then refit the connector.

14.3.1.4.2 Void occurs in sub scanning direction upon installation: ATR shutter solenoid cable comes into contact with 

developing cylinder

0015-8161

imagePRESS C1 P / imagePRESS C1 / Color Image Reader-H1 / imagePRESS C1+ (Printer) / imagePRESS C1+

[Inspected by Canon Inc.]

Description

Since the tie-wrap [1] binding the ATR shutter solenoid cable was fitted in the wrong position, the cable went slack and came into contact with the developing

cylinder, causing void in the sub scanning direction.

Summary of Contents for imagePRESS C1 P


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments