manualshive.com logo in svg

Canon imagePRESS C1 P, Service Manual, Page: 887 / 1265

Share
Download
Canon imagePRESS C1 P Service Manual Download Page 887

Chapter 15  

15-24

15.4 Jam Codes

15.4.1 Jam Code (Printer Unit)

0012-4835

imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / imagePRESS C1+

1. Type of Jam

T-15-8

2. Jam Code (Printer Unit)

T-15-9

Indicates that memory image area is full.

Delete the error documents or unnecessary documents to increase available 
memory.

Indicates that machine failed to save the document as the document number 
within the specified Box exceeds 1500.

Delete the document in the specified Box.

# 852

Indicates that an error occurred as the main power switch was turned OFF during 
job execution.

Check if the main power switch is ON, and then if required, repeat the job.

# 853

Indicates that the machine failed to execute jobs including printing huge amount 
of pages by printer due to insufficient resources.

Decrease the volume of document to print or execute the job again when there is 
no other booked print job.

Indicates that the machine failed to execute job during transmission of print data 
from PC to the machine due to cancellation from the printer driver.

Repeat the job again.

Indicates that not all the reception data from the host were spooled due to 
insufficient reception data spool area when the spool function is activated.

Deactivate the spool function and then transmit the job again.

Indicates that the reception data volume exceeded the upper limit reception data 
processing.

Repeat the print after all the job is completed. If that is not effective, check the 
transmission data.

Indicates that secure jobs of which amount is more than available at one time were 
introduced.

Execute or delete the secure job accumulated in the  Host machine and then 
execute the job again.

#854

Indicates that the machine failed to deliver the device information from devices 
other than same model group as the setting in 'System Administration Settings 
(Initial Setup/Registration) > Device Information Delivery Settings > Reception 
Limit by Delivery Group' is enabled.

Deactivate the 'reception limit of the delivery group' and then repeat the device 
information transmission.

#855

Indicates that the machine failed to deliver the device information as it included 
a language not available in the external phone (destination)

Contact the Service.

#856

Indicates that the job was cancelled due to insufficient hard disk area for 
temporarily stored data.

Contact the system administrator.

# 995

Indicates that the job was cancelled due to security error.

Contact the system administrator.

Code

Type of Jam

01xx

Delay jam

02xx

Stationary jam

0Axx

Residual jam

0B00

Door open jam

Code

Type of Sensor

Sensor No.

Remarks

xx01

Cassette 1 pickup sensor

PS28

xx02

Cassette 2 pickup sensor

PS34

xx03

Cassette 3 pickup sensor

PS41

Cause

Remedy

Summary of Contents for imagePRESS C1 P


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments