Canon imagePRESS C1 P, Service Manual, Page: 746 / 1265

Chapter 14
14-11
Field Remedy
1. Check to see if the ATR shutter solenoid cable goes slack.
2. If the cable goes slack, fit the tie-wrap [2] so that it can sit on the left of the wire-saddle as shown in [3], and correct loosening of the cable.
F-14-14
3. Make a copy and check if the symptom is solved.
14.3.1.4.3 Measure against scratches made on Fixing Roller in circumferential direction: Lines appear in sub scanning
direction
0016-5604
imagePRESS C1 P / imagePRESS C1 / Color Image Reader-H1 / imagePRESS C1+ (Printer) / imagePRESS C1+
[ Inspected by Canon Inc. ]
Description
When lines appear because of scratches made on the fixing roller in the circumferential direction, suspect dirty stays and shafts around the roller. When
replacing the fixing roller with a new one to prevent this symptom, refer to the following field remedy.
Field Remedy
1. Prepare brand-new fixing roller, collecting roller, and heating roller.
2. Remove the fixing roller, collecting roller, and heating roller from the fixing assembly.
3. Remove the fixing belt assembly.
4. Clean the stay [A] and [B] with lint-free paper impregnated with alcohol.
Note: When cleaning, take care not to get injury from the sharp edge of the stays or legs of screws.