Canon imagePRESS C1 P, Service Manual, Page: 936 / 1265

Chapter 16
16-39
(d) Jam code list (finisher-related)
T-16-50
(e) Jam code list (Feeder-specific)
T-16-51
0D90 transparency sensor (front, rear) PS3, PS29 when the mode is transparency mode
0D91 transparency sensor (front, rear) PS3, PS29 when the mode is not transparency mode
0D91 registration sensor PS9 when the mode is transparency mode
0D92 transparency sensor (front, rear) PS3, PS29
0D93 transparency sensor (front, rear) PS3, PS29
Code Sensor type Sensor notation
1001 inlet path sensor feed delay jam PI33
1002 punch path sensor (punch registration sensor) feed delay jam LED5/PTR5
1004 delivery path sensor feed delay jam PI34
1101 inlet path sensor feed stationary jam PI33
1102
inlet path sensor feed stationary jam
punch path sensor (Punch registration sensor) feed stationary jam LED5/PTR5
1104 delivery path sensor feed stationary jam PI34
1200 timing jam PI33
1500 stapler staple jam STP
1300 power-on jam PI33,PI34
1400 door open jam DOOR
1644 punch jam LED5/PTR5
1645 punch power-on jam LED5/PTR5
1791 saddle feed sensor feed delay jam PI18,PI19,PI20
1792 saddle delivery sensor feed delay jam PI11
1793 saddle inlet sensor feed delay jam PI22
17A1 saddle feed sensor feed stationary jam PI18,PI19,PI20
17A2 saddle delivery sensor feed stationary jam PI11,PI17
17A3 saddle inlet sensor feed stationary jam PI22
1786 saddle stapler staple jam S STP
1787 saddle power-on jam PI11,PI18,PI19,PI20,PI22
1788 saddle door open jam DOOR
Code Sensor type Sensor notation Description
0001 post-separation sensor PI7 the post-separation sensor does not detect paper when a feed of 452 mm has been made after
the start of separation.
0002 post-separation sensor PI7 - the separation sensor detects paper after a feed of "500 mm (if extra length, +200 mm) - 45.5
mm" has been made.
- the sensor goes on within a feed of 12 mm after detection of the trailing edge (holed paper);
the post-separation sensor detects paper when a feed of 50 m has been made after the
separation sensor goes on.
0003 registration sensor PI1 the registration sensor does not detect paper when a feed of 134.8 mm has been made after
the post-separation sensor goes on.
0004 registration sensor PI1 the read sensor goes off before the registration sensor goes off.
0005 feed sensor PI8 - read sensor does not detect paper when a feed of 364.2 mm (182.1 x 2) has been made from
the point of registration.
- the read sensor does not detect paper when a feed of 157.4 mm (78.7 x 2) has been made
from the point of No. 2 registration.
0006 feed sensor PI8 - the read sensor detects paper when a feed of 500 mm (if extra-length, +200 mm) has been
made from the start of feed after a temporary stop at point of reading.
- the read sensor detects paper when a feed of 514 mm has been made after the start of feed
from the standby point in mix mode (LTRR/LGL identified).
0007 delivery reversal sensor PI9 - if not in high-speed duplex mode, the delivery sensor does not detect when a feed of 132.1
mm has been made after paper has reached the leading edge downstream roller with respect
to the activation of the read sensor.
- the delivery sensor does not detect paper when a feed of 50 mm has been made after the start
of feed during a switch-back operation.
0008 delivery reversal sensor PI9 the delivery sensor detects paper when a feed of 161.9 mm has been made from the end of
reading the trailing edge.
0042 post-separation sensor PI7 1st; stationary jam at the post-separation sensor
0043 registration sensor PI1 1st; not reaching the registration sensor
0044 registration sensor PI1 1st; stationary at the registration sensor
Code Sensor type
Sensor
number
Remarks