Canon imageCLASS X LBP1238, Service Manual

Page: 75 / 220

The system manager can operate/set all the items in the [Settings/Registration] menu of the device.
However, if the security policy has been set by the security administrator described later, even the system manager cannot perform
operation or change the settings against the security policy.
The security administrator is an administrator who creates, applies, edits, backs up, and restores the security policy.
The security administrator is a system manager and is a user who knows the password for the security policy settings.
Account [Settings/Registration] menu Policy-related
Add/
delete
Settings
(Adminis-
trator set-
tings)
Settings
(Other
than the
adminis-
trator set-
tings)
Initialize
(User
mode)
Initialize
(Service
mode)
Intro-
duce/
change
Browse Back up/
restore
Disable
the re-
strictions
Security administrator *1 *1 -
System manager *1 *1 - - - -
End user - - *1 - - - - - -
Service technician - - - - - -
● Security Administrator Password
The security administrator password is a password that is set to protect the configured security policy. The password setting is
not mandatory.
Behavior when the security administrator password has been set
If the security administrator password has been set on this equipment, the security administrator password is required when
[Initialize All Data/Settings] is executed. This is intended to prevent the device from being initialized without discretion and
the configured security policy from being disabled.
NOTE:
Even if the security administrator password has not been set, as long as the security policy has been configured, [Management
Settings] > [Data Management] > [Initialize Menu] is grayed out and cannot be used.
Importing the security administrator password
If a security policy setting file of iR ADVANCE series where the security administrator password has been set is imported
via iW EMC DCM Plug-in, the security administrator password is not reflected.
In the case of importing the file via iW EMC DCM Plug-in, it is necessary to execute [Create Task to Change Security Policy
Password] and distribute the security administrator password to set the security administrator password.
DCM
ファイル
Administrator password
This equipment
DCM
DCM file
Data
This equipment
Model of the same series
Distribute the setting information
DCM
Plug-in
Setting information and
the security administrator password
Setting information
Export
Import
Distribute the administrator password
Initializing the security administrator password
In case the user has forgotten the security administrator password, there is a service mode setting for initializing the password.
Execute the service mode shown below to initialize the security administrator password set on this equipment.
Service mode > COPIER > Function > CLEAR > PLPW-CLR
*1. Restrained by the policy
3. Technical Explanation (System)
65