TESTMODE (Service mode for test print, operation check, etc.) > PRINT (Print test mode)
THRU
Setting of image correction table at test print
Detail
To set the image correction table that is used at the time of test print output.
When 0 is set, normal gamma LUT is used so that the density characteristics by the density
correction process can be checked.
When 1 is set, linear gamma LUT is used so that the density characteristics of this machine can
be checked.
Use Case
At trouble analysis
Adj/Set/Operate Method
Enter the setting value, and then press Apply key.
Display/Adj/Set Range
0 to 1
0: Normal gamma LUT
1: Through (linear) gamma LUT
Default Value
0
Supplement/Memo
Gamma LUT: Density gradation characteristic table
DENS
Adjustment of test print engine F value
Detail
To adjust the test print engine F value.
The larger the value, the darker the image becomes.
Use Case
At problem analysis
Adj/Set/Operate Method
Enter the setting value (switch negative/positive by +/- key), and then press Apply key.
Display/Adj/Set Range
-4 to 4
Default Value
0
Supplement/Memo
F value: Used as an index to indicate lens brightness.
MABK
Setting of toner thinning process
Detail
To set toner thinning process.
The larger the value, the greater the toner thinning amount at test print becomes.
Use Case
When color displacement occurs during test print
Adj/Set/Operate Method
Enter the setting value, and then press Apply key.
Display/Adj/Set Range
0 to 4
0: OFF
1: Mode 1
2: Mode 2
3: Mode 3
4: Mode 4
Default Value
0
FEED
Setting of paper source at test print
Detail
To set the paper source at the time of test print output.
If this mode is set when there is no Cassette 2 (option Pickup Cassette), the output is made from
Cassette 1 (standard Pickup Cassette).
Use Case
At trouble analysis
Adj/Set/Operate Method
Enter the setting value, and then press Apply key.
Caution
In case of using the Multi-purpose Tray, be sure to place paper on the tray before executing this
item.
Display/Adj/Set Range
0 to 4
0: Multi-purpose Tray
1: Cassette 1
2: Cassette 2
3: Cassette 3
4: Cassette 4
Default Value
1
9. Service Mode
196
Summary of Contents for imageCLASS X LBP1238
