Canon imageCLASS X LBP1238, Service Manual

Page: 192 / 220

COPIER (Service mode for printer) > OPTION (Specification setting mode) > BODY
MIBCOUNT Set of charge counter MIB scope range
Detail To set the range of counter information that can be obtained as MIB (Management Information
Base).
Adj/Set/Operate Method 1) Enter the setting value, and then press Apply key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 2
0: All charge counters are obtained
1: Only displayed counter* is obtained
2: All charge counters are not obtained
* : Counter specified by COUNTER 1 to 6
Default Value 0
Related Service Mode COPIER > OPTION > USER > COUNTER1 - 6
Supplement/Memo Counter meter-installed models only
NS-CMD5 Restriction on use of CRAM-MD5 authentication method at SMTP authentication
Detail To restrict use of CRAM-MD5 authentication method at the time of SMTP authentication.
Use Case
Upon user's request
Adj/Set/Operate Method
1) Enter the setting value, and then press Apply key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 1
0: SMTP server-dependent
1: Not used
Default Value
0
Supplement/Memo SMTP authentication: Protocol in which user authentication function is added to SMTP, which is
the protocol to be used for e-mail transmission. At the time of e-mail transmission, this protocol
executes authentication of the user account and the password between the SMTP server and the
user to approve e-mail transmission only when it's authenticated.
NS-PLN Restriction on use of plaintext authentication at SMTP authentication in unencrypted
environment
Detail To restrict use of PLAIN/LOGIN authentication, which is plaintext, at the time of SMTP
authentication under the environment where the communication packet is not encrypted.
Use Case Upon user's request
Adj/Set/Operate Method 1) Enter the setting value, and then press Apply key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 1
0: SMTP server-dependent
1: Not used
Default Value 0
Supplement/Memo SMTP authentication: Protocol in which user authentication function is added to SMTP, which is
the protocol to be used for e-mail transmission. At the time of e-mail transmission, this protocol
executes authentication of the user account and the password between the SMTP server and the
user to approve e-mail transmission only when it's authenticated.
9. Service Mode
182