manualshive.com logo in svg

Canon imageCLASS MF3010 VP, User Manual

Share
Download
Canon imageCLASS MF3010 VP User Manual Download Page 10

- A damp or dusty location
- A location exposed to smoke and steam, such as near a cookery or humidifier
- A location exposed to rain or snow
- A location near a water faucet or water
- A location exposed to direct sunlight
- A location subject to high temperatures
- A location near open flames

●

When installing the machine, gently lower the machine to the installation site so as not to catch your
hands between the machine and the floor or between the machine and other equipment, as this may
result in personal injury.

●

When connecting the interface cable, connect it properly by following the instructions in this manual.
If not connected properly, this may result in malfunction or electrical shock.

●

When moving the machine, follow the instructions in this manual to hold it correctly. Failure to do so
may cause you to drop the machine, resulting in personal injury.

 " Relocating the Machine(P. 216) "

●

Machines with a hard disk may not operate properly when used at high altitudes of about 3,000
meters above sea level, or higher.

IMPORTANT

If the operating noise concerns you

Depending on the use environment and operating mode, if the operating noise is of concern, it is
recommended that the machine be installed in a place other than the office.

Important Safety Instructions

5

Summary of Contents for imageCLASS MF3010 VP
























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands