Canon imageClass LBP6030w Manual Download Page 170

Page: 170 / 272

When pulling out the sealing tape

If any sealing tape remains inside the toner cartridge, print quality may deteriorate.

Do not pull the sealing tape at an angle. If the sealing tape breaks, you may not be able to pull it out completely.

If the sealing tape becomes stuck when pulling it out, keep pulling until it is completely removed.

Replace the toner cartridge.

Align with the toner cartridge guide (

), and push firmly all the way in.

Close the top cover.

㻝㻣㻜㻌㻛㻌㻞㻝㻥

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for imageClass LBP6030w

















































































































































































































































































Search results

Summary of Contents for imageClass LBP6030w

Reviews:

Related manuals for imageClass LBP6030w

Brands by name

Popular brands

Canon imageClass LBP6030w, Manual

Search results

Summary of Contents for imageClass LBP6030w

Reviews:

Related manuals for imageClass LBP6030w

Brands by name

Popular brands