Canon i70 Series, User Manual

Page: 53 / 169

Glossy Photo Paper GP-301N/GP-301
This paper is thicker than High Resolution Paper and has a glossy printing surface to produce printouts close to
photograph quality.
Loading
Load the paper with the whiter side facing up.
A maximum of 10 sheets can be loaded at once.
Set the paper thickness lever to the right.
When printing on Glossy Photo Paper, do not use any loading support sheet.
To prevent sheets from sticking to each other, separate them from each other before loading them in the
auto sheet feeder. Load the necessary number of paper (up to 10 sheets) in the auto sheet feeder one at a
time.
Printer Driver Settings
Media Type: Glossy Photo Paper
Page Size: Ensure the setting matches the size set in the application.
Handling of Printed Output
Remove each sheet as soon as it is printed.
Do not touch the printed surface until the ink is fixed (approx. two minutes).
Printable Area
See Printing Area
Note When you use Borderless Printing, create the data by using the same size as the paper size,
and paste the data so that it fills the editing screen without leaving any margins. If you are
using an application that allows you to set margins, set the left, right, top and bottom
margins to 0 mm or 0 inches. For instructions on setting margins, refer to the user's manual
for your application.