Canon i70 Series User Manual Download Page 29

Page: 29 / 169

No printhead

No print head is installed.
(The POWER lamp on
the printer flashes six
times.)

Install a print head according to the Easy Setup
Instructions.

The print head is
defective. (The POWER
lamp on the printer
flashes seven times.)

Contact the Customer Care Center.

Waste tank full

The waste ink tank is
nearly full.

Press the RESUME/CANCEL button on the
printer to recover from the error. You can print for
some time until the waste ink tank becomes full.
Contact the Customer Care Center as soon as
possible.

No Ink

An ink tank is not
installed .

Install an ink tank. Be sure to press on the [PUSH]
of the ink tank to ensure it is firmly seated.

Printer error

The battery level is low.
(The POWER lamp on
the printer flashes ten
times.)

The optional battery level is low. Follow the
procedure below.

1. Turn off the printer.
2. Connect the supplied universal AC adapter
or load a charged battery.
3. Turn on the printer.

A printing error has
occurred. (The POWER
lamp on the printer
flashes alternately orange
and green.)

Turn the printer off and on again. If the error
persists, contact the Customer Care Center.

Media type error

The paper selected is not
compatible with this
printer.

Cancel printing from the digital camera and select
a compatible paper type in the Print Style menu.

Summary of Contents for i70 Series










































































































































































Search results

Summary of Contents for i70 Series

Reviews:

Related manuals for i70 Series

Brands by name

Popular brands

Canon i70 Series, User Manual

Search results

Summary of Contents for i70 Series

Reviews:

Related manuals for i70 Series

Brands by name

Popular brands