Canon HJ40E, Operation Manual

Page: 93 / 186

E91
4. Operation in Full Mode
[ I-Gain ]
Iris
Remote: 90
Auto: 50
[ ]
[ I-Gain ]
Iris
Remote:
50 Auto:
90
[ ]
[ I-Gain ]
Iris
Remote:
50 Auto:
80
[ ]
MENU
[ I-Gain ]
[Trk]OFF
[ ]
MENU 1
A
Fr1P
[ Basic ]
IS STD IS STD
[ ] 1
IS STD IS STD
A
Fr1P
Shtl VTR
A 1 V
[ I-Gain ]
Specifying Remote Iris Gain
Although this value is factory-set, it can be adjusted as needed.
The same remote iris gain value applies to all users, regardless of the current user. Thus, there is no need to switch
users in advance. Unlike most other setting adjustments, any changes to this setting also apply to user 0.
Options
01 to 99
Description
Minimum gain Maximum gain
Default value: 90
MENU
× 3
[I-Gain]
× 2 or
Note: Do the following when
adjusting gain while checking
iris operation.
→ Con fi rm that the drive unit A/M
switch is set to [Auto] mode.
→ Set the camera iris mode to
[Remote].
Note: The current iris gain value
is retained even if you reset
other settings as described in
“ 4.2.1 Resetting Values. ” For
this reason, you will no longer
be able to view the default
setting. If necessary, make
a note of the default setting
before adjusting this value.
1
2
3
4
5
Press three times and
once.
Your selection is now highlighted.
Press .
The display switches to the
[I-Gain]
screen.
Press twice.
[Remote] is underlined.
The previous or default value is highlighted.
Press or .
Press left or right until you reach the desired value.
Press .
The display reverts to
Screen A.
Initial Top Screen
Screen A
[I-Gain] Screen