Canon HJ40E, Operation Manual

Page: 11 / 186

E9
Introduction
Dealing with Abnormalities
Warning
If any of the following situations occurs, immediately disconnect the lens cable from the camera
and contact your dealer or a Canon representative listed on the next page.
• Smoke, fumes, or unusual noises
• Entry of foreign objects (such as liquid or metal objects) inside the product
Maintenance and Inspection
Warning
Be sure to disconnect the cable and remove the lens from the camera before cleaning outside of
the lens. Do not use benzene, thinner, or other
fl ammable substances to clean the product. This
may cause fi re or electric shocks.
Note
1. Clean off any dust on the lens surface using a lens blower or a soft lens brush. In case of getting
fi ngerprints or stains on the lens, use a clean cotton cloth moistened with commercial lens
cleaning fl uid, or use lens cleaning paper. Gently wipe in a spiral pattern from the center of the
lens. Be careful not to rub dust across the lens, which may scratch the lens surface.
2. Routine inspection about once a year is recommended, depending on the conditions and
environment of use. Request overhaul, if needed.
Storage
Caution
Always attach the lens cap, hood cap, dust cap or covers before storage. Storing the lens without
the caps or covers attached poses a risk of
fi re if the lens concentrate light in direct sunlight.
Note
Immediately wipe off any moisture on the lens from misty or foggy environments, using a dry
cloth. Seal the lens in a plastic bag with a desiccant (preferably new) to prevent moisture inside.
Otherwise it may cause the mold or the malfunction of the product.