E141
4. Operation in Full Mode
[ I-Gain ]
Iris
Remote:
90
Auto:
50
[ ]
[ I-Gain ]
Iris
Remote:
90
Auto:
55
[ ]
Iris
[ ]
[ I-Gain ]
Torque:
High
Comp:
OFF
[ I-Gain ]
Iris
Remote:
90
Auto:
50
[ ]
[ I-Gain ]
Iris
Comp:
OFF
Torque:
High
[ ]
[ I-Gain ]
[Trk]OFF
[ ]
MENU
1
A
Fr1P
[ Basic ]
IS
STD
IS
STD
Specifying Iris Gain
(1) Specifying Auto Iris Gain
Top
Although this value is factory-set, it can be adjusted as needed.
To adjust the value, use either the auto iris gain adjustment trimmer (refer to the Lens Manual) or display operations. Regardless
of the method of adjustment used, the most recent setting takes precedence.
The same auto iris gain value applies to all users, regardless of the current user. Thus, there is no need to switch users in
advance. Unlike most other setting adjustments, any changes to this setting also apply to user 0.
Note: Do the following when
adjusting gain while checking
iris operation.
→
Con
fi
rm that the drive unit A/M
switch is set to [Auto] mode.
→
Set the camera iris mode to
[Auto].
Note: As you look at the lens iris
ring, set it to the position of
maximum gain at which
“
focus
hunting
”
does not occur.
Note: The current iris gain value
is retained even if you reset
other settings as described in
“
4.2.1 Resetting Values.
”
For
this reason, you will no longer
be able to view the default
setting. If necessary, make
a note of the default setting
before adjusting this value.
Press once and
four times.
The display switches to the
Iris screen.
Press
.
[I-Gain] is underlined.
Press
.
The display switches to the
[I-Gain]
screen.
Press
.
The display reverts to
Screen A.
Press
.
[Auto] is underlined.
The previous or default value is
highlighted.
Press or
.
Press left or right until you reach the desired function.
Initial Top Screen
Iris Screen
Screen A
[I-Gain] Screen
Options
01
to
99
Default: Varies depending on the factory-set value, but corresponds to
the value determined with the iris gain adjustment trimmer.
Description
Minimum gain
Maximum gain
MENU
×
4
Iris
[ ]
or
1
2
3
4
5
6
Summary of Contents for HJ40E
