Canon HJ40E, Operation Manual

Page: 157 / 186

E155
4. Operation in Full Mode
Specifying Servo Type from Zoom Demand
Specify either the speed or position servo as the type of servo to use from the zoom demand.
Important
First, switch to the user for whom the settings apply.
(For instructions, see “ 4.1.3 Switching Users ” or “ 4.2.1 User Screen Settings: Switching Users. ” )
Tracking: OFF
Movement
Zoom
[ ]
CurveMode
SpeedAdj
Control:
VR-Dem: ON
Zoom
[ ]
Sped
SpeedAdj
Control:
VR-Dem: ON
Zoom
[ ]
Posi
[ I-Gain ]
[Trk]OFF
[ ]
MENU
1
A
Fr1P
[ Basic ]
IS STD IS STD
Press once and fi ve times.
The display switches to the Zoom screen.
Press fi ve times.
[Control] is underlined.
The previous or default function is highlighted.
Press or .
Press left or right to switch the function to {Sped} or {Posi}.
Initial Top Screen
Zoom Screen
Options (D)
Sped Posi
Description
Speed servo Position servo
(D): Default value
MENU
× 5
Zoom
[ ]
× 5 or
1
2
3
Note: Selecting {Posi} will disable
the seesaw switch.
Additionally, only one demand
connector can be connected
when {Posi} is selected.
Normally, select {Sped}.