Canon HJ40E, Operation Manual

Page: 29 / 186

E27
3. Operation in Basic Mode
1
MENU
Menu screen
See “ 3.2 Con fi guration from the Menu Screen. ”
6
[Trk] Zoom tracking
Switch to ON when using zoom tracking.
See “ 3.1.6 Zoom Tracking ON/OFF. ”
2
IG Auto iris gain
Adjust the auto iris gain value.
See “ 3.1.3 Specifying Auto Iris Gain. ”
7
A 1
AUX1 switch
By default, the AUX1 switch for a zoom demand
is assigned to the {Shuttle} function, but it can
be reassigned as needed.
See
“ 3.1.8 Assigning Functions to the AUX1
Switch. ”
3 IS
Switch the IS compensation mode of the hori-
zontal direction.
See " 3.1.4 Switching the IS Compensation
Mode of the Horizontal Direction. "
8
A 2
AUX2 switch
By default, the AUX2 switch for a zoom demand
is assigned to the {Frame Preset 1} function,
but it can be reassigned as needed.
See “ 3.1.9 Assigning Functions to the AUX2
Switch. ”
4 IS
Switch the IS compensation mode of the vertical
direction.
See " 3.1.5 Switching the IS Compensation
Mode of the Vertical Direction. "
9
[I-Tq]
Iris torque
Adjust the level of torque in manual control of
the iris ring as needed.
See “ 3.1.10 Specifying Iris Torque. ”
5
A AUX switch
By default, the AUX switch for a drive unit is
assigned to the
“ Frame Preset 1 ” function, but it
can be reassigned as needed.
See “ 3.1.7 Assigning Functions to the AUX
Switch.
”
10
[Z.M.]
Zoom curve mode
Adjust zoom speed in response to pressing
the zoom seesaw switch or tilting the analog
demand thumb ring.
See “ 3.1.11 Specifying Zoom Curve Mode. ”