Canon HJ40E, Operation Manual

Page: 146 / 186

E144
4. Operation in Full Mode
Iris
[ ]
[ I-Gain ]
Torque: High
Comp: OFF
Iris
[ ]
Comp:
Torque: High
OFF
Iris
[ ]
Comp:
Torque: High
ON
㸨
Close: OFF
[ I-Gain ]
[Trk]OFF
[ ]
MENU
1
A
Fr1P
[ Basic ]
IS STD IS STD
Iris Compensation ON/OFF
The amount of light decreases when an extender (2.0x) is used. You can specify a function that compensates by opening
the iris by an amount equivalent to f/2.
Important
First, switch to the user for whom the settings apply.
(For instructions, see
“ 4.1.3 Switching Users ” or “ 4.2.1 User Screen Settings: Switching Users. ” )
Press once and four times.
The display switches to the Iris screen.
Press three times.
[Comp] is underlined.
The previous or default function is
highlighted.
Press or .
Press left or right to switch the function
{ON} or {OFF}.
Initial Top Screen
Iris Screen
Options
ON
(D)
OFF
Description
Iris compensation No iris compensation
(D): Default value
MENU
× 4
Iris
[ ]
× 3 or
Note: The iris may not fully close
in some cases when the iris
compensation is set to ON
while an extender (2.0x) is
used. If so, activate detection
as described in “ Iris Close
Detection ON/OFF. ”
*: Displayed when {Comp} is set to ON.
1
2
3