Canon HJ40E, Operation Manual

Page: 62 / 186

E60
3. Operation in Basic Mode
[ I-Gain ]
Iris
Remote: 90
Auto: 50
[ ]
[ I-Gain ]
Iris
Remote: 90
Auto: 55
[ ]
Iris
[ ]
[ I-Gain ]
Torque: High
Comp: OFF
[ I-Gain ]
Iris
Remote: 90
Auto: 50
[ ]
[ I-Gain ]
Iris
Comp: OFF
Torque: High
[ ]
[Trk]OFF
Shtl
A 1
A 2
MENU
IG: 50
A
Fr1P
Fr1P
IS STD IS STD
Specifying Iris Gain
(1) Specifying Auto Iris Gain
Top
Although this value is factory-set, it can be adjusted as needed.
To adjust the value, use either the auto iris gain adjustment trimmer (refer to the Lens Manual) or display operations.
Regardless of the method of adjustment used, the most recent setting takes precedence.
The same auto iris gain value applies to all users.
Note: Do the following when
adjusting gain while checking
iris operation.
→ Con fi rm that the drive unit A/M
switch is set to [Auto] mode.
→ Set the camera iris mode to
[Auto].
Note: As you look at the lens iris
ring, set it to the position of
maximum gain at which “ focus
hunting ” does not occur.
Note: The current iris gain value
is retained even if you reset
other settings as described in
“ 3.2.1 Resetting Values. ” For
this reason, you will no longer
be able to view the default
setting. If necessary, make
a note of the default setting
before adjusting this value.
Press once and
three times.
The display switches to the Iris screen.
Press .
[I-Gain] is underlined.
Press .
The display switches to the
[I-Gain]
screen.
Press .
The display reverts to
Screen A.
Press .
[Auto] is underlined.
The previous or default value is highlighted.
Press or .
Press left or right until you reach the desired function.
Initial Top Screen
Iris Screen
Screen A
[I-Gain] Screen
Options
01 to 99
Default: Varies depending on the factory-set value, but corresponds to
the value determined with the iris gain adjustment trimmer. Description
Minimum gain Maximum gain
MENU
× 3
Iris
[ ]
or
1
2
3
4
5
6