5–37
COPYRIGHT © 1996 CANON INC. CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
5. INSTALLATION
3. Checking the Operations
1) If you are not connecting the Communication
Control Board-A1 or the Interface Board-B1
(not requiring the Power Supply-A1), go to
step 4).
Connect the connector 1 of the Power Supply-
A1 to the connector 2 of the Copy Data
Controller-A1 securely as indicated.
Check to make sure that the cord is in the
groove of the board.
Figure 5-509
2) Connect the Power Supply-A1 to the power
plug, and check to make sure that LED1 of the
Copy Data Controller-A1 turns ON.
Figure 5-510
3) Turn ON the copier's main switch, and check
to make sure that LED2 of the Copy Data
Controller-A1 flashes.
Make a copy, and check to make sure that
LED3 flashes during copying operation.
Figure 5-511
4) To connect the Communication Board-A1 or
the Interface Board-B1 (requiring the Power
Supply-A1), go to step 5).
Turn ON the copier's main switch, and check
to make sure that LED1 turns ON and LED2
flashes.
Make a copy, and check to make sure that
LED3 flashes during copying operation.
Figure 5-512
1
6
SW4
SW1 ON
SW5 ON
LED6
LED5
LED4
LED3
LED2
LED1
SW2
SW3
JB2
JB1
JA1
JA2
EPROM
SRAM
CPU
IPC
JC9
JC6
JC5
JC8
J5
1
6
LED1
LED3
LED2
1
6
SW4
SW1 ON
SW5 ON
LED6
LED5
LED4
LED3
LED2
LED1
SW2
SW3
JB2
JB1
JA1
JA2
EPROM
SRAM
CPU
IPC
JC9
JC6
JC5
JC8
J5
1
6
LED2
LED3
1
6
SW4
SW1 ON
SW5 ON
LED6
LED5
LED4
LED3
LED2
LED1
SW2
SW3
JB2
JB1
JA1
JA2
EPROM
SRAM
CPU
IPC
JC9
JC6
JC5
JC8
J5
1
6
LED1
1
2
Groove of the board.