background image

Page 1

Network Quick Install Cards Overview

1. Configure the Document Centre for Token Ring or Dynamic TCP/IP addressing (If applicable)

2. Install the Document Centre on your network 

3. Distribute the CentreWare applications and print drivers to all users

4. Install an optional Network Scan, Accounting or Fax feature (If necessary)

For 100MBps Ethernet or 
Token Ring Networks 

Use the

 100BaseT Ethernet or Token Ring Interface Quick Install Card 

Card to set Ring Speed and Source 

Routing.

Dynamic TCP/IP addressing

The Document Centre 460/470 has DHCP enabled by default.  Use the 

DHCP / BOOTP Quick Install Card

 to 

disable DHCP then use the 

Static (Manual) TCP/IP Addressing Quick Install Card

 to configure TCP/IP infor-

mation on your Document Centre.

Novell NetWare Networks

Novell NetWare users can use either the 

NetWare Quick Install

 Cards 

OR

 Xerox CentreWare software to 

install their printer. For CentreWare instructions refer to the 

CentreWare Network Services Guide

 supplied with 

your Document Centre.

All other Networks

Locate and perform the procedures indicated the Quick Install Card that apply to your network environment. Use 
the 

Network Installation and Trouble Shooting Guide

 to install on the following networks:

Novell NetWare 3. X (or 4.1X Bindery Mode)
Microsoft Windows (TCP/ IP) Peer- to- Peer Networks
Banyan VINES Network
OS/ 2 Networks (Peer-to-Peer or Warp 4.0  NetBEUI and TCP/ IP)

Distribute Print Drivers

Use the instructions on the back of this card to distribute CentreWare print drivers to your network users.

CentreWare Conductor

CentreWare Conductor is software for Microsoft Windows 95/98, Windows NT Workstation, and Windows 2000 
Clients on Novell networks that allows a user to monitor a printer. Refer to the 

CentreWare Network Services 

Guide

 supplied with your Document Centre for installation and usage instructions on print driver and Centre-

Ware applications.

Scanning 

Refer to the 

Network Scanning Services Guide

 found in the Scanning Services Kit to install the scanning 

option.

Network Accounting 

Refer to the 

Equitrac OfficeTrac Quick Install 

Card to control and monitor your networked Document Centre 

by the EquiTrac OfficeTrac software application. 

Network FAX 

Refer to the 

RightFAX

 

Network FAX Quick Install 

Cards to connect your Document Centre to your RightFAX 

server.

701P34132

Summary of Contents for 460







































Reviews: