6) Lead the 4P connector
o
of the copier
through the edge saddle of the control panel
side plate.
7) Connect the 4P connector
!1
of the Control
Card V and the copier’s 4P connector.
Figure 5-407
8) Place the plastic sheet
!2
in the hole in the
control panel (used for the display of the
Control Card V).
Figure 5-408
9) Remove the protection sheet from the control
panel guide plate of the Control Card V.
10) Attach the control panel guide plate
!3
on the
copier’s control panel.
Figure 5-409
11) Attach the memory record sheet and the
transparent sheet.
12) Turn OFF the copier’ power switch, and check
the operation of the Control Card V.
13
12
9
10
11
5–33
COPYRIGHT © 1996 CANON INC. CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
5. INSTALLATION
