COPYRIGHT © 1996 CANON INC. CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
3–204
3. OPERATIONS AND TIMING
6. Adjusting the AE/Fixing Assembly Settings
CANCEL
+
OK
–
*3* ADJUST 06
AE_SLOP
: xxxxx <– (xxxxx)
FIXER-RESIST : xxxxx <– (xxxxx)
FILM-ALNK
: xxxxx <– (xxxxx)
ABC_TBL
: xxxxx <– (xxxxx)
STRD_ADJ
: xxxxx <– (xxxxx)
Item
AE-SLOP
FIXER-
RESIST
FILM LANK
Description
When copying in AE mode with priority on
image quality, some types of originals gen-
erate light images. If such is the case, use
this mode to adjust the copy image density.
Use it to enter the resistance of the fixing
assembly.
• If you have replaced the fixing assembly,
enter the value recorded on the label
attached to the fixing assembly.
Use it to enter the film thickness rank (fixing
temperature control value).
• If you have replaced the fixing assembly,
enter the value recorded on the label
attached to the fixing assembly, thereby
setting the fixing temperature control
value.
Settings
1~19
0~4
Remarks
Service handbook
p.2-21.
Enter a value
higher than the
recorded value by
1 to 2 if shiny
lines (vertical)
occur on solid
black copies.
0 1 2 3 4
XXX
Label
Resistance
to
enter
0 1 2 3 4
XXX
Label
Value to enter
(in this case,'3')
