Canon GP160DF, Service Manual

Page: 316 / 797

[Bit 4,5,6]
Selects transmission mode; international transmission (1), international transmission (2)
or international transmission (3).
When errors occur frequently due to echo when sending transmissions overseas, set
the transmission mode by dial registration or service software switch.
Settings at dial registration (user level):
When registering the 1-touch dial or coded speed dial transmission mode, set to
international transmission (1). If the error is not resolved, set to international transmis-
sion (2) and international transmission (3), in that order. Transmission modes set for 1-
touch dial or coded speed dial override service software switch settings.
When transmission modes are selected by these switches, international transmis-
sion mode can also be set using transmission via the numeric key pad. Refer to the
chart below for settings for transmission modes.
International transmission (1): ignores the first DIS signal sent by the reception
machine.
International transmission (2): Sends a 1850Hz tonal signal at the time of DIS signal
transmission.
International transmission (2): Sends a 1650Hz tonal signal at the time of DIS signal
transmission.
Table 13-505
[Bit 7]
Selects whether or not to send a 1080Hz tonal signal before sending the CED signal.
COPYRIGHT © 1999 CANON INC. CANON GP160 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 13 TROUBLESHOOTING
13-82
Error codes for errors which occur at transmission due to echo
##005, ##100, ##101, ##102, ##104, ##210, ##280, ##281, ##283, ##284, ##750,
##760, ##765, ##774, ##779, ##784, ##794
MEMO
:
Bit
Transmission mode
International transmission (1)
International transmission (2)
International transmission (3)
7 6 5 4 3 2 1 0
* 0 0 1 0 0 * 0
* 0 1 0 0 0 * 0
* 1 1 0 0 0 * 0
Error codes for errors which occur at reception
#005, ##101, ##106, ##107, ##114, ##200, ##201, ##790
MEMO
: