Canon GP160DF, Service Manual, Page: 402 / 797

COPYRIGHT © 1999 CANON INC. CANON GP160 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 13 TROUBLESHOOTING
13-168
Cause
• DIS bit 49 received from the other party’s
machine becomes 0.
Countermeasure
• Send to another fax machine which has that
function.
• When the other party’s machine is of a dif-
ferent type, use normal G3 transmission.
#0080 [TX] The other party’s machine has no ITU-T recommended sub-address reception
function
Cause
• DIS bit 50 received from the other party’s
machine becomes 0.
Countermeasure
• Send to another fax machine which has that
function.
• When the other party’s machine is of a dif-
ferent type, use normal G3 transmission.
#0081 [TX] Other party’s machine has no ITU-T recommended password reception function
Cause
• DIS bit 47 received from the other party’s
machine becomes 0.
Countermeasure
• Send to another fax machine which has that
function.
• When the other party’s machine is of a dif-
ferent type, have the destination set their
machine so it can send polling transmis-
sions, then perform polling reception.
#0082 [TX] Other party’s machine has no ITU-T recommended selective polling reception
function
Cause
• Password/sub-address not set in the other
party’s machine.
• The other party’s machine’s memory is full.
Countermeasure
• Contact the other party and have them set
the password/sub-address.
• Contact the other party and have them
clear some memory.
#0102 [TX] Password/sub-address sent at time of transmission, but DCN received