manualshive.com logo in svg

Canon FAX-L350, Service Manual

Share
Download
Canon FAX-L350 Service Manual Download Page 54

1-41

FAX-L350  Chapter 1: General Description

5.5 Protective Mechanism

5.5.1 Data battery backup function

If there is a power outage or if the power is turned off, the data stored in the control memory is retained since

the lithium battery function as a data battery backup.

For details on the backed up data, 

see Chapter 1: 5.4 Data-related precautions  on

Page 1-36.

5.5.2 Overcurrent protection

This machine is provided with an overcurrent with built-in fuse, to prevent abnormal rises in temperature if
an overcurrent flows to the motors and power supply due to driver IC trouble, software lockup and short

circuit.

Protected Parts

Safety Measures

Document feed motor

IC protector (FU501) on SCNT board

Main motor

IC protector (FU501) on SCNT board

Power supply unit

Glass-tube current fuse (FU101:250V, 3.15A)
overcurrent protection circuit

thermistor (TH101)

Fixing ass’y

Thermal fuse, thermistor

5.5.3 Lightning protection

The fax unit’s electrical components are protected from abnormal voltage caused by lightning.

Protected Component

Safety Device

NCU board ass’y

Arrester (AR1, AR2) located at the primary side of the NCU board

discharge a voltage of more than 500VDC via the power cord.

Power supply unit

Varistor (VZ101, VZ102*) and arrester (AR101)* located at the primary

side of the power supply unit discharge a voltage of more than
* For VZ102 and AR101, only the AE version exits.

When protection is not possible

The NCU board sometimes may not be protected even by the protection circuits if lightning
strikes the telephone line.

5.5.4 Power leakage protection

The AC line, telephone line, and metal parts of the fax unit are completely insulated.  The fax unit has a
grounded power cord to prevent electrical shock.  If power leakage does occur, use the fax unit only with a

grounded electrical outlet supplying the proper voltage.

REFERENCE

NOTE

Summary of Contents for FAX-L350






















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands