manualshive.com logo in svg

Canon FAX-L350, Service Manual

Share
Download
Canon FAX-L350 Service Manual Download Page 175

3-64

FAX-L350  Chapter 3: Maintenance and Service

c) Line signal reception test

The line detect test menu is selected by pressing numeric button 9 from the faculty test menu.  This test
checks the operation of the NCU signal sensor and frequency counter.  In Menu 1, the CI, status can be

detected and in Menu 2 the frequency can be detected at changing detection levels.  In this way, you can
check if the NCU board is correctly detecting signals.

c-1) Test Menu 1

Test Menu 1 is selected by pressing numeric button 1 from the Line Detect menu.  When CI,  is detected

from the modular jack, the display changes from OFF to ON and the received frequency is displayed.

c-2) Test Menu 2

Not used

c-3) Test Menu 3

Test Menu 3 is selected by pressing numeric button 3 from the Line Detect menu.  When CNG is de-

tected from the modular jack, the display changes from OFF to ON.

Summary of Contents for FAX-L350






















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands