manualshive.com logo in svg

Canon FAX-L350, Service Manual

Share
Download
Canon FAX-L350 Service Manual Download Page 3

Application

This manual has been issued by Canon Inc. for qualified persons to learn technical theory, installation, maintenance,

and repair of products.  This manual covers all localities where the products are sold.  For this reason, there may

be information  in this manual that does not apply to your locality.

Corrections

This manual may contain technical inaccuracies or typographical errors due to improvements or changes in

products.  When changes occur in applicable products or in the content of this manual, Canon will release tech-

nical information as the need arises.  In the event of major changes in the contents of this manual over a long or

short period, Canon will issue a new editions of this manual.

The following paragraph does not apply to any countries where such provisions are inconsistent with local law.

Trademarks

The product names and company names described in this manual are the registered trademarks of the individual

companies.

Copyright

This manual is copyrighted with all rights reserved.  Under the copyright laws, this manual may not be copied,

reproduced or translated into another language, in whole or in part, without the written consent of Canon Inc.

Copyright ©  1999 by Canon Inc.

CANON INC.

Office Imaging Products Technical Support Dept.  3

5-1 Hakusan 7-Chome, Toride-city, Ibaraki 302-8501, Japan

DTP System

This manual was produced on an Apple Macintosh

®

 personal computer, final pages were printed on Canon SUPER

LASER SHOT B406 PS.

All graphics were produced with Macromedia FreeHand

®

.

All documents and all page layouts were created with Adobe PageMaker

®

.

Summary of Contents for FAX-L350






















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands