Canon EOS M6 Mark II Advanced User'S Manual Download Page 79

Page: 79 / 606

Scene Intelligent Auto/Hybrid Auto (Fully Automatic)

[ ] Brightness

Adjust image brightness.

[ ] Contrast

Adjust contrast.

[ ] Saturation

Adjust the vividness of colors.

[ ] Color tone 1

Adjust amber/blue color tone.

[ ] Color tone 2

Adjust green/magenta color tone.

[ ] Monochrome

Set the toning effect for monochrome shooting. Set to

[Off]

to shoot in

color.

[Saturation]

[Color tone 1]

, and

[Color tone 2]

are not available

with options other than

[Off]

[Background blur]

is not available when the flash is used.

These settings are reset when you switch shooting modes or set the power
switch to <

>. To save the settings, set

[

: Retain Creative Assist data]

[Enable]

Saving Effects

To save the current setting to the camera, press the <

> button on the

Creative Assist setting screen, then select

[OK]

. Up to three presets can be

saved as

[USER*]

. After three have been saved, an existing

[USER*]

preset

must be overwritten to save a new one.

Summary of Contents for EOS M6 Mark II































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS M6 Mark II

Reviews:

Related manuals for EOS M6 Mark II

Brands by name

Popular brands

Canon EOS M6 Mark II, Advanced User'S Manual

Search results

Summary of Contents for EOS M6 Mark II

Reviews:

Related manuals for EOS M6 Mark II

Brands by name

Popular brands