Canon EOS M6 Mark II, Advanced User'S Manual

Page: 196 / 606

196
Anti-flicker Shooting
z
With [Enable] set, the shutter-release time lag is longer when you shoot under
a flickering light source. Also, the continuous shooting speed may become
slower, and the shooting interval may become irregular.
z
This function will not be applied to movie recording.
z
Flicker at a frequency other than 100 Hz or 120 Hz cannot be detected. Also, if
the flickering frequency of the light source changes during continuous shooting,
effects of the flicker cannot be reduced.
z
In the <
t
>, <
d
>, or <
f
> mode, if the shutter speed changes during
continuous shooting or if you shoot multiple shots of the same scene at different
shutter speeds, the color tone may become inconsistent. To avoid inconsistent
color tones, use <
t
>, <
a
>, or <
s
> mode at a fixed shutter speed.
z
Color tone of captured images may vary between [Enable] and [Disable] .
z
Shutter speed, aperture, and ISO speed may change when you start shooting
(even with AE lock).
z
If the subject is against a dark background or if there is a bright light in the
image, flicker may not be properly detected.
z
Flicker reduction may not be possible under special lighting.
z
Depending on the light source, flicker may not be detected properly.
z
Depending on the light sources or shooting conditions, the expected result may
not be obtained even if you use this function.
z
Taking test shots in advance is recommended.
z
Flicker is not reduced in Basic Zone modes.
z
Flicker reduction also works with flash photography. However, the expected
result may not be obtained for wireless flash photography.