Canon EOS M6 Mark II, Advanced User'S Manual

Page: 565 / 606

565
Troubleshooting Guide
The specified exposure changes when I shoot with ISO Auto
using flash.
z
When there is a risk of overexposure in flash photography, shutter
speed or ISO speed is automatically adjusted to reduce loss of detail in
highlights and shoot at standard exposure. In flash shots with certain
lenses, shutter speeds and ISO speeds displayed when you press the
shutter button halfway may not match the actual settings used. This may
alter the brightness of backgrounds that are out of flash range.
z
To avoid shooting at different shutter speeds or ISO speeds than
displayed when you press the shutter button halfway in <
d
>, <
s
>,
<
f
>, <
a
>, or <
t
> mode, shoot with a manually set ISO speed.
Remote control shooting is not possible.
z
When taking still photos with a wireless remote control, set the drive
mode to [
Q
] or [
k
] (
=
137). When recording movies, set [
z
:
Remote control] to [Enable] (
=
278).
z
Check the position of the remote control’s release timing switch.
z
If you are using Wireless Remote Control BR-E1, see
=
225,
=
448.
z
To use a remote control for time-lapse movie recording, see
=
262.
A white
s
or red
E
icon is displayed during shooting.
z
It indicates that the camera’s internal temperature is high. Image quality
of still photos may be worse when a white
[
s
] icon is displayed. If the
red [
E
] icon is displayed, it indicates that the shooting will soon stop
automatically ( = 226).