Canon EOS M6 Mark II, Advanced User'S Manual

Page: 227 / 606

227
General Still Photo Shooting Cautions
Images and Display
z
Under low- or bright-light conditions, the displayed image may not reflect the
brightness of the captured image.
z
Under low light, noise may be noticeable in image display even at low ISO
speeds, but there will be less noise in your shots, because image quality varies
between display and captured images.
z
The screen or exposure value may flicker if the light source (lighting) changes.
In this case, stop shooting temporarily and resume under the light source you
will use.
z
Pointing the camera at different direction may momentarily prevent correct
display of brightness. Wait until the brightness level stabilizes before shooting.
z
If there is a very bright light source in the image, the bright area may appear
black on the screen. However, the actual captured image will correctly show
the bright area.
z
In low light, if you set the [
5
: Disp. brightness] to a bright setting, noise or
irregular colors may appear in the image. However, the noise or irregular colors
will not be recorded in the captured image.
z
When you magnify the image, the image sharpness may look more pronounced
than in the actual image.
Lens
z
Image Stabilizer is active all times, even without the shutter button pressed
halfway, when you use an EF-M lens with
[IS mode] in [
z
: IS settings] set to
[On] , or an EF or EF-S lens with the lens image stabilizer switch set to <
1
>.
The Image Stabilizer consumes battery power and may decrease the number
of possible shots depending on the shooting conditions. When the Image
Stabilizer is not necessary, such as when using a tripod, it is recommended that
you set the IS switch to <
2
>.
z
With EF lenses, focus preset during shooting is only available when using
(super) telephoto lenses equipped with this function released in and after the
second half of 2011.
z
With an optional HDMI cable (camera end: Type D), you can display images on
a television ( = 323). Note that no sound will be output.