Canon EOS M6 Mark II Advanced User'S Manual Download Page 557

Page: 557 / 606

557

Household Power Outlet Accessory

If the access lamp does not light up, try unplugging the USB power adapter and

plugging it in again.

The charging time required and the amount charged vary depending on
ambient temperature and remaining capacity.

For safety reasons, recharging in low temperatures (0–10°C / 41–50°F) will

take longer.

Batteries are not charged when the camera is connected via Wi-Fi or when the
card slot/battery compartment cover is open.

Household Power Outlet Accessory

You can power the camera with a household power outlet by using the

DC Coupler DR-E17 and Compact Power Adapter CA-PS700 (each sold

separately). For instructions on attachment and use, refer to the DR-E17

and CA-PS700 instruction manuals.

Do not use an AC adapter other than the Compact Power Adapter CA-PS700.

While the camera’s power switch is on, do not connect or disconnect the power
cord or connector or do not disconnect the DC coupler.

After using the camera, unplug the power plug from the power outlet.

Summary of Contents for EOS M6 Mark II































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS M6 Mark II

Reviews:

Related manuals for EOS M6 Mark II

Brands by name

Popular brands

Canon EOS M6 Mark II, Advanced User'S Manual

Search results

Summary of Contents for EOS M6 Mark II

Reviews:

Related manuals for EOS M6 Mark II

Brands by name

Popular brands