Canon EOS 5DS, Instruction Manual

Page: 81 / 534

81
A
Fully Automatic Shooting (Scene Intelligent Auto)
4
Take the picture.
Press the shutter button completely to
take the picture.
X The captured image will be displayed
for 2 sec. on the LCD monitor.
The focus indicator <
o
> blinks and focus is not achieved.
Aim the Area AF frame over an area with good contrast, then press
the shutter button halfway (p.55). If you are too close to the subject,
move away and try again. If focus cannot be achieved, the AF status
indicator <
e
> will also blink.
When focus is achieved, the AF points do not light up in red.
The AF points light up in red only when focus is achieved in low-light
conditions.
Multiple AF points light up simultaneously.
Focus has been achieved at all those points. You can take the
picture as long as an AF point covering the target subject is lighting
up.
The beeper continues to beep softly. (The focus indicator <
o
>
does not light up.)
It indicates that the camera is focusing continuously on a moving
subject. (The AF status indicator <
e
> lights up, but the focus
confirmation light <
o
> does not light up.) You can take sharp
pictures of a moving subject.
Note that focus lock (p.83) will not work in this case.
FAQ
The <
A
> mode makes the colors look more impressive in nature, outdoor,
and sunset scenes. If you did not obtain the desired color tones, change the
mode to <
d
>, <
s
>, <
f
>, or <
a
>, set a Picture Style other than
<
D
>, then shoot again (p.164).