Canon EOS 5DS Instruction Manual Download Page 125

Page: 125 / 534

125

Customizing AF Functions

You can limit the selectable AF area selection modes to suit your
shooting preferences. Select the desired selection mode and press
<

> to append a checkmark <

>. Then select [

] to register the

setting.

: Manual select.:Spot AF

For pinpoint focusing with a narrower
area than single-point AF (manual
selection).

: Manual selection:1 pt AF

One of the AF points set by
[

Selectable AF point

] setting can be

selected.

: Expand AF area:

The camera will focus with the manually-selected AF point and the
adjacent AF points (above, below, on the left, and on the right).

: Expand AF area:Surround

The camera will focus with the manually-selected AF point and the
surrounding AF points.

: Manual select.:Zone AF

The AF area is divided into nine focusing zones for focusing.

: Auto selection:61 pt AF

The Area AF frame (entire AF area) is used for focusing.

Select AF area selection mode

The <

> mark cannot be removed from [

Manual selection:1 pt AF

If the attached lens belongs to group H (p.104), you can only select
[

Manual select.:Spot AF

], [

Manual selection:1 pt AF

], and [

Expand

AF area:

Summary of Contents for EOS 5DS























































































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS 5DS

Reviews:

Related manuals for EOS 5DS

Brands by name

Popular brands

Canon EOS 5DS, Instruction Manual

Search results

Summary of Contents for EOS 5DS

Reviews:

Related manuals for EOS 5DS

Brands by name

Popular brands